You must be 18+ to use this website

Fast Gas Manufacturers Instructions

H270 May cause or intensify fire; oxidizer

H280 Contains gas under pressure; may explode if heated 

H336 May cause drowsiness or dizziness 

P220 Keep away from clothing and other combustible materials  

P244 Keep valves and fittings free from oil and grease 

P370 + P376 in case of fire: stop leak if safe to do so

P304 + P340 + P315 IF INHALED: Remove person to fresh air and keep comfortable or breathing. Get immediate medical advice/ attention.

P403 Store in a well ventilated place 

P410 Protect from sunlight 

Supplemental Information 

Pressurised container. Protect from sunlight and do not expose to temperatures exceeding 50°C. Segregate from flammable gases and other flammable materials in store. Keep away from combustible materials. Do not pierce or burn even after use. Do not spray ono a naked flame and any incandescent material. Do not inhale. Asphyixant in high concentration. Contact with liquid may cause cold burns/ frostbite. Keep out of the reach of children. 

 

Instructions For Use 

The gas cylinder must be used with the approved pressure. Regulator from NITROUS OXIDE E942 FOOD GRADE. 

  1. Remove the protection cap of the valve 

  2. Connect the regulator to the discharge valve 

  3. Set the outlet flow / pressure from the regulator

  4. Avoid shock

 

Disposal 

Ensure cylinder is empty. Dispose of properly according to local government requirements. Contact local refuse handler or recycle centre for instruction. The cylinder can be delivered to a waste collection centre when it is completely empty only. The checking avout the empty cylinder, is done by a little pressure on its pin placed on the valve. When the cylinder is empty, the pin has to go down for 12mm approx. Do not refill.